Which cameras are supported?

FAQ · Booth Junkie knowledgebase

KB648

Which cameras are supported?

In short

Booth Junkie works with Canon EOS cameras, talking directly to whatever camera is connected rather than checking it against a simple yes/no list, so support naturally covers a wide range of Canon DSLR and mirrorless bodies.

  • Generic USB/UVC webcams are supported too.
  • If your exact model isn’t listed, get in touch and we can confirm before you buy.

Below is the list of EOS models Booth Junkie has been specifically set up for (this is also the same list used to correctly display each camera’s own control dial on the Admin Panel’s Camera tab). If your exact model isn’t listed, it may still work generically via EDSDK – get in touch and we can confirm before you buy.

Supported EOS models

Model Also sold as Supported
EOS R6 V – ✓
EOS R6 Mark III – ✓
EOS R8 – ✓
EOS R6 Mark II – ✓
EOS R10 – ✓
EOS R7 – ✓
EOS R6 – ✓
EOS R50 – ✓
EOS R100 – ✓
EOS M50 Mark II Kiss M2 ✓
EOS 850D Rebel T8i, Kiss X10i ✓
EOS 250D / 200D Mark II Rebel SL3, Kiss X10 ✓
EOS 4000D / 3000D Rebel T100 ✓
EOS 6D Mark II – ✓
EOS 200D Rebel SL2, Kiss X9 ✓
EOS 800D Rebel T7i, Kiss X9i ✓
EOS 77D EOS 9000D ✓
EOS 5D Mark IV – ✓
EOS 7D Mark II – ✓
EOS 5D Mark III – ✓
EOS 90D – ✓
EOS 80D – ✓
EOS 2000D / 1500D Rebel T7, Kiss X90 ✓
EOS 1300D Rebel T6, Kiss X80 ✓
EOS 760D / 8000D Rebel T6s ✓
EOS 750D Rebel T6i, Kiss X8i ✓
EOS 700D Rebel T5i, Kiss X7i ✓
EOS 100D Rebel SL1, Kiss X7 ✓
EOS 1200D Rebel T5, Kiss X70, EOS Hi ✓
EOS 70D – ✓
EOS 6D – ✓
EOS 650D Rebel T4i, Kiss X6i ✓
EOS 600D Rebel T3i, Kiss X5 ✓
EOS 1100D Rebel T3, Kiss X50 ✓
EOS 60D – ✓
EOS 550D Rebel T2i, Kiss X4 ✓
EOS 7D – ✓
EOS 500D Rebel T1i, Kiss X3 ✓
EOS 5D Mark II – ✓
EOS 50D – ✓
EOS 450D Rebel XSi, Kiss X2 ✓
EOS 1000D Rebel XS, Kiss F ✓
EOS 40D – ✓

Don’t see your exact model?

Booth Junkie also supports generic USB/UVC webcams as an alternative to a Canon DSLR, and very recently released Canon models may just need a little time to be added to this list – get in touch and we can confirm compatibility before you buy.

No camera at all

Booth Junkie can also run with no camera at all. Slide the Camera tab’s switch to Simulated for an animated placeholder live view and clearly marked placeholder photos, which is handy for demos, training and trying out layouts. See Using the Simulated Camera for Demos, Training and Testing.

Important: Not for real events

It isn’t for real events.

There’s more on choosing a camera, including webcams and buying advice, on the photo booth cameras page.

Was this article helpful?